nav emailalert searchbtn searchbox tablepage yinyongbenwen piczone journalimg journalInfo searchdiv qikanlogo popupnotification paper paperNew
2022, 04, v.42 689-693
中子发生器PLC控制算法设计
Design of PLC Control Algorithm for a Neutron Generator
基金项目(Foundation): 国家科技计划项目国家重点研发计划(2018YFB1501903-03)资助
邮箱(Email): guojf217@nenu.edu.cn;
DOI:
摘要:

提出了一种基于CXMs模型的中子发生器PLC控制算法。该方法基于系统需求分离出系统的各种状态,采用CXMs模型,通过状态序列对过程的动态行为进行建模,模型内部状态转换与系统功能相对应,结合模型和状态表采用PLC实现控制算法。实验结果表明:中子发生器输出功率的稳定性和可靠性得到有效提高,进而确保了稳定的中子产额。该方法可推广应用于温室环境、农业机械、石油化工、智能监控等控制领域。

Abstract:

A PLC control algorithm of a neutron generator based on the CXMs model is proposed.This method separates various states of the system based on the system requirements,uses the CXMs model,and models the dynamic behavior of the process through the state sequence.The internal state transition of the model corresponds to the system function.Combined with the model and state table,PLC is used to realize the control algorithm.The results show that the stability and reliability of the output power of the neutron generator can be improved dramatically to further enhance the stability of neutron yield.In all,this method can be applied to the greenhouse environment,modern agricultural machinery,petrochemical industry,intelligent monitoring,and other control fields after further optimization.

参考文献

[1]乔亚华.中子管的研究进展及应用[J].核电子学与探测技术,2008,28(6):1134-1139.

[2]刘林茂,刘雨人,景士伟.中子发生器及其应用[M].北京:原子能出版社,2005.

[3]秦爱玲,邓景珊.中子发生器产额稳定性[J].核电子学与探测技术,2007,27(4):783-785.

[4]肖宪东,龚亚林,周立岩,等.中子发生器及相关三路电源设计[J].工业技术创新,2018,5(6):87-90.

[5]Li G,Zhang Z S,Chi Q,et al.50 mm diameter digital DC/pulse neutron generator for subcritical reactor test[J].Nuclear instruments and methods in physics research section B:beam interactions with materials and atoms,2012,290:64-68.

[6]周长庚,娄本超,马文君.基于光纤传输的中子发生器控制系统[J].核电子学与探测技术,2003,23(6):510-512.

[7]张洋.基于DSP的中子发生器控制台研究与设计[D].长春:东北师范大学,2015.

[8]李银伢,盛安冬,王远钢.参数不确定时滞系统的鲁棒PID控制[J].控制与决策,2004,19(10):1178-1182.

[9]王蕾,宋文忠.PID控制[J].自动化仪表,2004,25(4):3-8.

[10]段力学.PID参数整定方法分类与概述[J].现代计算机,2012,3(7):23-26.

[11]杨智,朱海锋,黄以华.PID控制器设计与参数整定方法综述[J].化工自动化及仪表,2005,32(5):1-7.

[12]程一斌,王祥傲.S7-200PLC与组态王在供胶监控系统设计上的应用[J].安徽农业大学学报,2019,46(3):554-558.

[13]Wan,Mei F.Research of constant pressure water supply system based on PLC[J].Applied mechanics&materials,2014,624:465-468.

[14]胡涛,苏建良,石剑锋.PLC技术与应用及其发展分析[J].机床与液压,2005,33(12):135-137.

[15]Kefalas P,Eleftherakis G,Kehris E.Communicating x-machines:a practical approach for formal and modular specification of large systems[J].Information and software technology,2003,45(5):269-280.

基本信息:

DOI:

中图分类号:TL816.3

引用信息:

[1]陈相全,董永军,谢晖,等.中子发生器PLC控制算法设计[J].核电子学与探测技术,2022,42(04):689-693.

基金信息:

国家科技计划项目国家重点研发计划(2018YFB1501903-03)资助

检 索 高级检索

引用

GB/T 7714-2015 格式引文
MLA格式引文
APA格式引文